加拿大28组合算法公式

新闻资讯

怎么提高热风炉热气流速度?

2019-12-06 来源:http://www.xezaja.cn 发布人:众焱小编 浏览量:
[导读]:  为了提高热空气炉的使用效率,一些企业通常改善设备的热空气流速度,但一些用户不太清楚这个操作的优点,所以对大多数用户使用和操作,完善
  为了提高热空气炉的使用效率,一些企业通常改善设备的热空气流速度,但一些用户不太清楚这个操作的优点,所以对大多数用户使用和操作,完善热空气炉的热空气流速度了解优势。
  In order to improve the use efficiency of the hot air furnace, some enterprises usually improve the hot air flow speed of the equipment, but some users are not clear about the advantages of this operation, so for most users to use and operate, improve the hot air flow speed of the hot air furnace to understand the advantages.
  1. 热风炉在运行过程中,直接影响热风炉的热风流速、流量和干燥效果。热风炉的干燥速度也受热风流量的影响。
  1. During the operation of the hot blast stove, the hot blast flow rate, flow rate and drying effect of the hot blast stove are directly affected. The drying speed of the hot blast stove is also affected by the hot blast flow.
  2、提高热风炉的热风流量,提高热风的流速,可提高板材的工作效率。
  2. Increase the hot air flow rate of the hot air stove and the hot air flow rate can improve the working efficiency of the plate.
  3.抽风机的总压和风量必须合适。如果总压过低,风量过小,将直接影响热风炉的抽提,降低热风炉的产量;如果总压过高,过多的空气,会直接增加电的损耗,而且还会使废气温度升高很多,增加热损耗。
  3. The total pressure and air volume of the exhaust fan must be appropriate. If the total pressure is too low and the air volume is too small, it will directly affect the extraction of the hot blast furnace and reduce the output of the hot blast furnace; if the total pressure is too high and too much air, it will directly increase the power loss, and also make the exhaust gas temperature rise a lot and increase the heat loss.
  4. 提高热风流速对提高热风流速有非常重要的作用。
  4. It is very important to improve the velocity of hot air.
热风炉生产厂家
  5. 加强缸体的保温,使用沸腾炉加热,增加固相温差和温度梯度。
  5. Strengthen the heat preservation of the cylinder block, use the boiling furnace to heat, and increase the solid temperature difference and temperature gradient.
  6. 为了提高热风的流速,需要在热风炉末端设计合理的排风除尘系统,在末端设计热风加热系统。
  6. In order to improve the flow rate of hot air, it is necessary to design a reasonable exhaust and dust removal system at the end of the hot air stove and a hot air heating system at the end.
  7、增加了保温桶,采用加热炉加热,增加温度梯度。
  7. Heat preservation barrel is added and heating furnace is used to increase temperature gradient.
  8. 提高热风炉的热风流量,提高热风流量。
  8. Increase the hot air flow of the hot air stove and the hot air flow.
  9. 增加固相加热面积。
  9. Increase solid heating area.
  总之,提高热风炉热流的速度能有效促进设备内的材料干燥度,温度,改善通风的性能,,通过热气流的速度提升,不仅可以导致设备性能的提升,而且可以有效地提高设备的整体效率,减少一些不必要的麻烦。
  In a word, improving the speed of hot air flow in hot blast furnace can effectively promote the dryness, temperature and ventilation performance of the materials in the equipment. By increasing the speed of hot air flow, not only the performance of the equipment can be improved, but also the overall efficiency of the equipment can be effectively improved and some unnecessary troubles can be reduced.
返回顶部

版权所有©山东众焱机械有限公司 备案号: 服务热线:18005415007 流量统计:

彩票极速赛车规律破解 加拿大28算法技巧 极速赛车计划百分百 极速赛车输了三十万 加拿大28两期计划预测 极速赛车计划手机软件 极速赛车计划网页版 pc加拿大28app 加拿大28在线精准计划 彩票极速赛车计划